|
BACK TO SHOPPING
Highway 22
Modular Panel System Features:
Part
No. 500695 $429.00
Modular wiring system
22 power circuits supported through 15 fuses and 1
circuit breaker
Battery and accessory power tap studs provided for
system expansion
Panel protected with a 175 amp Mega-Fuse junction block
with a 8 gauge panel feed wire
Nylon mechanically secured panel containing secondary
push-back locks, has a 7-1/2” x 4-1/2” footprint,
3-3/8”in height,
and mounted on a (G10) non conductive epoxy base
All power buss bars are constructed of 6 gauge copper
All wires are constructed from heat resistant (-60F-
+275F)
GXL heavy-wall wire with laser printed circuit
identification every 2 inches
GM color coded wires for ease of installation
All power circuits wires are 12 gauge constructed
New front loaded vibration proof self- locking (Hooke’s
Law) screw down terminal connection
Dedicated battery and ignition circuits for electronic
fuel injection (EFI) Kit contains 3 relays (Horn, Turn
Signal & 40 amp Electric Fan or Fuel Pump)
Turn signal and hazard flasher circuits provided
8 gauge alternator feed wire provided
The kit is set-up for a GM “SI” internally regulated
alternator or GM 1-wire
Alternator diode is also provided
Kit includes 3 (In-dash Ignition, Headlight & Alum. Knob
and Floor Dimmer) switches
GM in-column ignition switch connectors provided, along
with 3-7/8” GM steering column connectors with male and
female terminals
Plugs directly most 69-74 GM column and most after
market steering columns or use the terminals and
connector provided to mate to any column
Spare circuits available (for power windows, locks,
cruise, etc.).
Engine compartment (oil pressure, water temp, tach,
starter, neutral safety, brake switch, ignition switch,
distributor (GM HEI or Points), coil, main power and
alternator)
Chassis wiring (fuel pump, electric fan, headlights,
running lights, brake lights, 3rd brake lt.,
directional, license plate, radio, heat & AC, and
wipers)
Full color schematic of overall vehicle wiring along
with individual harness subkit instructions for
trouble-free installation.
|